Swimming with a Libre sensor

This blog considers whether Libre sensors can be worn for swimming and water activities and if so, is there a limit of 30 minutes?


Need to share this information? Download a free summary of Need to Know: Swimming Wearing a Libre sensor. Click here.


A frequent concern to Libre wearers is the issue of getting the sensor wet. Whether it’s in a hot tub, in a spa, in the sea, on water rides, playing water sports or any other water activity.

The Freestyle Libre instructions state:

“Your sensor is water-resistant and can be worn while bathing, showering or swimming.

Do NOT take your Sensor deeper than 1 metre (3 feet) or immerse it in water for longer than 30 minutes. “

Here, we explain these limits and what your options are when participating in water activities.

Is a Libre sensor waterproof?

Libre sensors are water-resistant to IP67 standard, but this isn’t waterproof. The two terms do not mean the same thing. 
The manufacturer has only tested the sensor to the standard to meet this international rating. It confirms that the sensor is able to withstand being immersed in water under defined conditions of pressure and time i.e. to a depth of 1m for a period of 30 minutes. In addition, tests only give a level of water-resistance in pure water when the object is static.

This does not mean that Libre sensors have been tested and determined as suitable for wearing in a swimming pool or the sea, when movement adds to the forces on the sensor. Heat from hot tubs or jacuzzies may also put different pressures on the sensor and adhesive which may also affect its ability to function correctly. These conditions have not been tested by the manufacturer.

In fact, there’s no such thing as ‘waterproof’ as all materials will be penetrable at some point - it’s just depends on the conditions.


What could happen if I stay in the water for too long?

There are 2 main risks in terms of the sensor if you exceed the 30 minutes or swim deeper than 1 metre.

Firstly there’s the adhesion of the sensor to the skin or where the sensor is attached to the sticky film itself. The first of these is the more likely issue for sensor wearers as the body has many contours that mean sensors are not lying completely flat on the skin and so if the glue weakens it could loosen the contact between skin and sensor.

Secondly there’s the functionality of the sensor that could be affected by prolonged immersion in water. This is less likely but this does happen in some instances.

What factors will affect the sensor in water?

One factor that may affect this is heat. So, whilst you can wear a sensor in a hot tub, prolonged time in the water may mean that the glue weakens and the sensor falls off.

Another problem that you may experience is when movement adds to the forces on the sensor. The viscosity of the water on the sensor may cause it to loosen or come off, for example when doing water sports or sliding down a water chute.

A third factor is the presence of chemicals in the water. As we’ve mentioned, the IP67 standard is where the product is tested in pure water so does not take into account the ‘real-world’ conditions we’re likely to encounter when swimming and other related activities.

Any activity that dries out the skin – like enjoying an evening in the hot tub - can affect the adhesion of a sensor!

Can I make it waterproof?

Many of us find the limitations set by the manufacturer as too restrictive and it’s a common question to ask “how can I make the sensor waterproof” so to be able to swim for longer or do other water activities.
There are an assortment of suggestions online to resolve the issue. Popular ideas are stickers, patches and plasters. But, these usually have breathable qualities and even if water-resistant, the sensor will still come into contact with some water which could affect the adhesion, even if not immediately obvious.

When covering a sensor with a sticker or patch it's likely that small amounts of water will get underneath and erode the adhesion between the sensor and the skin. It can also lead to skin irritation, not to mention the likelihood that the sticker or patch will start to peel and look unsightly. A sensor's functionality could also be affected by water 'trapped' under the sticker or patch and it may it stop giving accurate readings.

If a product tells you that it is waterproof and not just water-resistant, this would mean that the skin can't 'breathe'. The consequences of this could be that sweat from the skin's normal day to day activities cannot escape and this itself is likely to lead to other skin problems.

What other options are there to protect the sensor when swimming?

Wearing a Libreband will help to protect a sensor from the friction caused by swimming and being in water, such as in a hot tub. The cover and neoprene armband are themselves water resistant. However, the product does not provide any additional waterproof protection to the Libre sensor as it's just not possible.

A key advantage to wearing a Libreband in water is that it can be put on and removed easily. This enables the skin to dry naturally and reduces the likelihood of adhesion problems. Librebands also dry quickly and can be worn again and again - in fact reused many times!

Many Libreband customers including competitive athletes, have worn the armband for swimming and water activities and have found it helpful for protection and in giving them confidence in water whilst wearing a sensor, especially when doing so for extended periods.

Librebands have been worn by customers in swimming pools, open water, hot tubs, spas and the sea.

Advantages of wearing a Libreband®

✅ Quick drying, water-resistant strap

✅ Protects against friction of water

✅ Soft neoprene fabric for comfortable, close fit

✅ Wear as and when needed

✅ Easy to put on and take off

✅ Durable for repeated wear with long lasting protection

✅ Doesn't fray, lift or get dirty at the edges like stickers

✅ Reduces likelihood of skin irritation compared to stickers.

Read more about how a Libreband provides better protection here.

What if I’m wearing a transmitter eg. MiaoMiao or Bubble?

If your wearing a 3rd party product ie. additional transmitter, with your sensor then you may need additional support when swimming or participating in water activities. Although most of these products advertise themselves as being waterproof, they may not conform to UK standards and you should be particularly cautious if purchasing such products 2nd hand.

Our Libreband+ range of armbands can help with keeping transmitters in position too.

What else can I do?

In addition to wearing a Libreband, below are some steps we recommend when swimming wearing a sensor or CGM.

  1. When wearing a Libre sensor, it’s important to keep hydrated so that the body works as efficiently as possible and this is especially true when swimming and being active in water. To avoid the effects of dehydration you should keep up your water consumption, during activities and afterwards too. It’s a good idea to keep a bottle of water on the poolside for this reason.
  2. Rinse off immediately post-swim as this will reduce the effect or any chemicals from the water, or salt from the sea.
  3. Always moisturise as soon as you can after you have finished your activity, once rinsed-off and dry. This can help to keep moisture from evaporating and prevent the skin from drying out.


Wearing a sensor for longer than the stipulated 30 minutes does mean that the sensor is not being used in accordance with the manufacturer’s instructions and could therefore invalidate the warranty. But many wearers do swim for longer than 30 minutes and go deeper than 1 metre, without any problems, and this includes long distance swimmers and lifeguards too.

Although there are products available that advertise they are ‘waterproof’ it is more likely that they mean water-resistant and using a sticker or covering will not ‘waterproof’ the sensor itself. However, covering it such as with a Libreband may help to reduce the likelihood of it being knocked or falling off. Below are some reviews we’ve received mentioning swimming with a Libreband.

Below are some reviews we’ve received mentioning swimming with a Libreband.


Amazing! Fantastic item,1st time I've been for a swim without losing my sensor.

Maurice, May 2022


The band is brilliant! I've recently started swimming again, and when I use the band, my sensor stays put without me worrying it's going to float away 😄

Elizabeth, April 2022


I was recently diagnosed with type 1 and had a fear of how I can continue to run, swim and exercise without being afraid of knocking my sensor,, not now I have my libre arm band it has transformed my life already in only a few days since receiving it. So so happy thank you.

Robert, January 2022


What a fantastic little invention! Recently got back into swimming and this has saved my Libre becoming a casualty! Worth the investment thank you"

Hayley, December 2021


Fantastic!!! Love it!!

This is absolutely the product I had been looking for!! At last I have been able to swim on holiday without fear of losing my libre!!

Julie, October 2021

Review for Libreband to protect Libre sensor.

5 start review for Libreband for Libre sensor.

Further information

You can see our video on Swimming with a Libre Sensor here.




Love My Libre is not associated or affiliated with Abbott or FreeStyle Libre. Content here and on our website www.lovemylibre.com does not constitute medical advice or replace the relationship between you and healthcare professionals nor the advice you receive from them.

The author of this blog has type one diabetes and uses the FreeStyle Libre 2 which is provided on NHS prescription.

FreeStyle Libre is a registered trademark of Abbott Diabetes Care Inc.


Leave a comment

Please note, comments must be approved before they are published